Product CategoryProduct Model Nos.Installation NotesTroubleshooting Tips
SMPS Power Plant for SMF Batteries-24V SeriesDY 2350L, DY 4350Lpdf 2pdf 2
SMPS Power Plant for SMF Batteries-24V SeriesDY 21400EL, DY 41400ELpdf 2pdf 2
SMPS Power Plant for SMF Batteries-48V Series DY 1350, DY 2350, DY 4350,
DY 6350, DY 2350B (Slim Line)
pdf 2pdf 2
SMPS Power Plant for SMF Batteries-48V SeriesDY 2700, DY 4700pdf 2
pdf 2
SMPS Power Plant for SMF Batteries-48V SeriesDY 21400E, DY 31400E,
DY 81400E
pdf 2pdf 2
SMPS Power Plant for SMF Batteries-48V SeriesSMPS Power Plant for SMF Batteries-48V Seriespdf 2pdf 2
SMPS Power Plant for SMF Batteries-110V SeriesDY 21400EHpdf 2pdf 2
SMPS Power Plant for Ni-CD Batteries-24V SeriesDY 61400ELN, DY 81400ELNpdf 2pdf 2
SMPS Power Plant for Ni-CD Batteries-48V SeriesDY 81400EN, DY 121400ENpdf 2pdf 2
Chargers for Lead Acid BatteryDY 1210, DY 1616pdf 2
DC-DC CONVERTERSDY 24500 (2U) (Slim Line),
DY 224500, DY 248500A,
DY 248500B, DY 3481K2
pdf 2pdf 2

Leakage Current

Leakage current flows between power supply wires and earth ground within the rated value. In case of the multiple operation, however, the total leakage current will be the sum of the leakage current flows from each power supply.

leakage current

Wires

Rated voltage and current varies depending on a wire. It is necessary to use thick wires, which cover the rated output current of a power supply.

weres

Earthing

The earth terminal of power supply should be connected to the equipment where power supply is placed as thicker and shorter to protect electric shock or noise interference.

weres1

Water Splash

When the unit is operated where water drops into the power supply, it may cause failure. In this case, please arrange waterproofing.

water splash

Vibration / Impact

When installing the power supply at a location where vibration or impact is given, please make a certain measure about the vibration or impact.

temprature

Temperature

Keep Power Plant at least one foot away form the wall to ensure proper ventilation. Power supply itself has a lifetime, and this depends on ambient temperature. When operated continuously in long period, an overhaul is recommended.

temprature1

Load Requirement

Ensure that there is at least 25% of the rated load connected, other wise DC ON LED on the FCBC Modules may start flickering.

temprature1

Battery Connetcion

Ensure that battery is always connected when operating the power plant System on mains supply, to avoid chattering of high voltage disconnect relay.

temprature1

Interested? Let's get in touch!

Contact us